Specification

System Information

Industries Protected

Automatic Sprinkler

Datasheet Library

Wet Pipe Sprinkler Systems
Dry Pipe Sprinkler Systems
Deluge Water Spray Systems
Pre Action Systems
ESFR Sprinkler System
Foam Water Sprinkler System
Wet & Dry Pipe Riser System

   

Wet Pipe Sprinkler Systems

 

The Wet System is an installation where the sprinkler pipes are constantly charged with water under pressure. It is the simplest and most widely used system, and because the water can be available immediately a sprinkler operates, it is the speediest system to come into action. MORE

Dry Pipe Sprinkler Systems

 

A Dry Pipe Sprinkler System is one in which pipes are filled with pressurized air or nitrogen, rather than water. This air holds a remote valve, known as a dry pipe valve, in a closed position. Located in a heated space, the dry-pipe valve prevents water from entering the pipe until a fire causes one or more sprinklers to operate. Once this happens, the air escapes and the dry pipe valve releases. Water then enters the pipe, flowing through open sprinklers onto the fire. MORE

Deluge Water Spray Sprinkler System

 

Deluge Systems, as the name implies, deliver large quantities of water over specific areas in a relatively short period of time. These systems are used to protect against rapidly growing and spreading fires, typically involving flameless liquids, solvents etc. MORE

Pre Action Systems

 

A pre-action sprinkler system consists of a sprinkler system and an electrical detection system with water held back by the pre-action valve and pressurized air in the sprinkler pipework. In the event of the operation of the electrical detection system the pre-action valve operates and allows water into the sprinkler pipework. MORE

 

ESFR Sprinkler System

 

Around 1990 EARLY SUPPRESSION FAST RESPONSE (ESFR) sprinkler systems began being installed in warehouses and distribution centers. An ESFR sprinkler system is located in the ceiling structure yet for many categories of product offers fire protection better than in-rack systems. MORE

Foam Water Sprinkler System

 

Foam-water sprinkler systems are installed to protect structures, equipment and facilities where a potential hazard for two dimensional flammable liquid fire exists. These systems can provide prevention, extinguishment, control and/or exposure protection, depending on the application. MORE

Wet & Dry Pipe Riser System

 

Wet and Dry Riser Systems are essentially stand pipe system and comprise fixed piping , fittings, valves, fixings and associated Fire Fighting Equipment primarily landing valves that delivers water from a reliable water supply to designated areas of buildings where hoses can be deployed for fire fighting. Such systems are typically provided in high-rise and large scale buildings. MORE

 

[Top]

 What's new this month...!